Dewalt Grinders | SHOP BY CATEGORY 18V Brushless Xr Li-Ion 125Mm Flat Head Angle Grinder Dcg405Fn-Xj

Product Description

The DCG405FN-XJ Flathead Grinder utilises a flat gear head to allow use within acute angles down to 43. The E-Clutch combined with the Kickback Brake and Anti Vibration side handle earn this tool the PERFORM PROTECT shield for CONTROL and VIBRATION. The BRUSHLESS Motor provides 800W of power at 9,000RPM, with mesh covers protecting the motor from drawing in debris this tool is GUARANTEED TOUGH. E-CLUTCH The electronic torque limiting clutch reduces the maximumtorque reaction transmitted to the operator in case of jamming of a disc. This feature also prevents the gearing and electric motor from stalling. The torque limiting clutch has been factory set and cannot be adjusted ELECTRONIC BRAKE stops the wheel quickly when the trigger is released NO VOLT The No-volt function stops the grinder restarting without theswitch being cycled if there is a break in the power supply SOFT START The soft start feature allows a slow speed build-up to avoid an initial jerk when starting. This feature is particularly useful when working in confined spaces ANTI-VIBRATION SIDE HANDLE The anti-vibration side handle offers added comfort by absorbing the vibrations caused by the tool POWER-OFF OVERLOAD PROTECTION The power supply to the motor will be reduced in case of motor overload. With continued motor overload, the tool will shut off. The switch will need to be released then depressed to restart tool. The tool will power off each time the current load reaches the overload current value (motor burn-up point). If continued overload shutdowns occur, apply less force/weight on the tool until the tool will function without the overload engaging KICKBACK BRAKE When a pinch, stall, or bind-up event is sensed, the electronic brake engages with maximum force to quickly stop the wheel,reduce the movement of the grinder, and shut the grinder off. The switch will need to be released then depressed to restart tool Specifications: Voltage: 18V Power output: 800W Max disc diameter: 125mm Spindle thread: M14 Length: 310mm Weight: 1.8kg