Makita Cordless Tools | SHOP BY CATEGORY 18V Brushless 15 Piece 4 X 5.0Ah Combo Kit Dlx1514Tx1

Product Description

Includes 1 x MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z 1 x MAKITA 18V Brushless 4-Stage Impact Driver Skin DTD173Z 1 x MAKITA 18V Brushless 125mm Angle Grinder Skin DGA508Z 1 x MAKITA 18V Brushless SDS+ Rotary Hammer Skin DHR242Z 1 x MAKITA 18V Brushless 165mm Circular Saw Skin DHS680Z 1 x MAKITA 18V Brushless Reciprocating Saw Skin DJR187Z 1 x MAKITA 18V Brushless Starlock Max Multi-Tool Skin DTM52ZX3 1 x M AKITA 18V Brushless 1/2inch Mid-Torque Impact Wrench Skin DTW700Z 1 x MAKITA 18V 125mm Random Orbital Sander Skin DBO180Z 1 x MAKITA 18V Brushless Stick Vacuum Skin DCL283ZBX1 1 x MAKITA 18V Brushless D-Handle Jigsaw Skin DJV184Z 1 x MAKITA 18V Brushless AWS 82mm Planer Skin DKP181Z 1 x MAKITA 18V Blower Skin DUB185Z 1 x MAKITA 40V Max XGT Bluetooth Jobsite Radio Skin MR002GZ 1 x MAKITA 18V Long Distance Torch Skin DML812 4 x MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850B-L 1 x MAKITA 18V Lithium-ion Dual-Port Rapid Battery Charger DC18RD 1969360 2 x MAKITA Canvas Tool Bag Suits LXT418 & LXT423 1999369 MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z The 18V Brushless Hammer Driver Drill provides 141Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications. Compact Design – for improved handling and control the overall length has been reduced by 27mm vs. the previous model 3 Drilling Modes – screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 141Nm max. torque. Hammer Drilling mode (rotation with hammering) on the for drilling in masonry up to a maximum 16mm hole diameter. LED Joblight – high brightness twin LED joblight with pre-glow and after glow functions. Illuminating the working area for greater visibility during application High Power Output – This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. 2 Speed Mechanical Gearing – high speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation. All metal gear construction – allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability, and will continue to perform in years to come. XPT – Extreme Protection Technology protects the tool against dust & moisture even in the harshest jobsite conditions, increasing durability Specifications Max. drilling capacities in wood: Auger bit: 50mm Self-feeding bit: 76mm Hole saw: 152mm Max. drilling capacities in steel: 13mm Max. drilling capacities in masonry: 16mm No load speed: Hi: 0 – 2,100rpm Lo: 0 – 550rpm Impact rate: Hi: 0 – 31,500ipm Lo: 0 – 8,250ipm Max. peak torque: 141Nm Max. tightening torque: Hard: 130Nm Soft: 65Nm MAKITA 18V Brushless 4-Stage Impact Driver Skin DTD173Z Experience precision, power, and control like never before with the Makita DTD173 Impact Driver. Featuring an innovative battery layout, this tool stands out by repositioning the center of gravity directly in line with the grip. The result Enhanced balance and stability for superior control in every application. With a maximum fastening torque of 180Nm, the DTD173 tackles heavy-duty tasks effortlessly, while its 4- stage speed selection and Assist mode variations provide optimal control for every job. At only 111mm in length, its compact design excels in tight spaces, and the quick switch button allows seamless one-handed mode adjustments for uninterrupted workflow. For added durability and precision, the enhanced bit holder minimizes wobble, ensuring accuracy when it matters most. Whether you’re a professional tradesperson or a DIY enthusiast, the Makita DTD173 is engineered to deliver performance and reliability every time. Makita: Built for those who demand the best. Optimised battery layout, moves center of gravity in line with the grip for enhanced control Maximum fastening torque of 180Nm for heavy duty applications 4 stage speed selection & 4 Assist mode variations for optimised speed control Compact design at only 111mm in length for comfortable use in tight spaces Quick switch button for single handed mode selection Enhanced bit holder provides reduced bit wobble Specifications No load speed Max.: 0 – 3,600rpm Hard: 0 – 3,200rpm Med: 0 – 2,100rpm Soft: 0 – 1,100rpm Impact rate Max.: 0 – 3,800ipm Hard: 0 – 3,600ipm Med: 0 – 2,600ipm Soft: 0 – 1,100ipm Max. tightening torque Max.: 180Nm Hard: 170Nm Med: 50Nm Soft: 20Nm Drive shank 6.35mm(1/4″) Hex Overall length 111mm Skin weight 0.8kg Weight (with battery) 1.5kg (BL1860B) Voltage 18V Includes Belt clip (346317-0) 266622-8 (Truss Head Screw) MAKITA 18V Brushless 125mm Angle Grinder Skin DGA508Z BL Brushless Motor, provides more power and longer run times Electric brake, for increased safety and effeciency Kickback detection, detects sudden changes in wheel speed and shuts down motor Automatic Torque Drive, automatically slows rpm increasing torque to power through cuts Anti restart function Paddle switch design No Load Speed: 8,500rpm Overall Length: 362mm Wheel Size: 125mm MAKITA 18V Brushless SDS+ Rotary Hammer Skin DHR242Z 3 Mode operation: hammer only, rotation only, rotation & hammer Unique rubber joint suppresses vibration to battery 2.0j of impact energy Specifications Impact Rate: 0 – 4,700ipm Vibration per min: 13.5m/s² MAKITA 18V Brushless 165mm Circular Saw Skin DHS680Z Powerful Brushless DC motor (BLDC) Automatic Torque Drive; automatically increases motor torque according to load conditions Magnesium base with 45 and 50 degrees bevel cutting capacity Compact and lightweight design Rear dust exhaust port Twin LED job light with pre-glow LED indicator panel with 3 indicators for: Battery Fuel Gauge, Automatic Torque Drive and Overload Protection Tool hanger for hanging on a ladder or rafter Large lock off lever easily operated even with a gloved hand Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries Specifications Voltage: 18V No Load Speed: 5,000rpm Bevel Capacity: 50 Blade Diameter: 165mm Max Cutting Capacities: 0: 57mm 45: 41mm 50: 37mm Weight: 3.3kg Length: 350mm MAKITA 18V Brushless Reciprocating Saw Skin DJR187Z 32mm stroke with a cutting capacity of 255mm in wood Newly designed vertical crank mechanism reduces vibration High performance 3,000spm no-load speed Rafter hanging hook for added convenience XPT technology that protects against dust & moisture Specifications Length of Stroke: 32mm Max. cutting capacities in pipe: ø 130mm Max. cutting capacities in wood: 255mm Overall Length: 439mm Strokes per minute Hi: 0 – 3,000spm Lo: 0 – 2,300spm Voltage 18V MAKITA 18V Brushless Starlock Max Multi-Tool Skin DTM52ZX3 The Makita 18V LXT Brushless Multi Tool (DTM52) delivers more power and less vibration than ever before. The DTM52 is engineered with premium features like AVT for reduced vibration and lower noise. While the new STARLOCK Max accessory mount system provides improved performance, ideal for cutting, sanding, scraping, grout removal, and more. The DTM52 delivers increased cutting efficiency with an improved oscillation angle of 3.6 engineered for faster, more aggressive cutting and sanding. The variable speed control dial (6,000 20,000 OPM) and soft start feature enable the user to match the speed to the application with more control. The DTM52 is engineered for a range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for builders, carpenters, plumbers, wood floor installers, and general trades seeking a best in class cordless multi tool. Starlock accessory mounting system designed for heavy duty applications Anti Vibration Technology (AVT) with a counterbalance system significantly reducing vibration Increased cutting efficiency with improved oscillation angle of 3.6 for rapid cutting speeds Variable speed control dial for adjusting the speed to suit the application Tool less lever lock system allows for quick install and removal of accessories Includes a Bow Shape Plunge Cut Saw Blade Specifications Oscillation angle,left/right: 1.8 Degrees (3.6 Degrees Total) Oscillation per/min: 10,000 – 20,000opm Vibration: 2.5 m/s² Noise: 69dB(A) Voltage: 18V Tool-less Accessory Change: Yes Starlock Compatible: Yes Starlock Max Compatible: Yes MAKITA 18V Brushless 1/2inch Mid-Torque Impact Wrench Skin DTW700Z The 18V Brushless 1/2 Impact Wrench is designed to suit the needs of manufacturing technicians, mechanics and fabricators. The DTW700 has an efficient Makita Brushless Motor, providing powerful torque in a compact design with 700Nm of maximum fastening torque and a powerful 1,000Nm of nut busting torque. The DTW700 features 4-stage power selection, increasing versatility and allowing the user to select the optimum rpm and fastening torque for the task at hand. It also features a forward and reverse automatic stop function, with 6 modes optimised for fastening applications, providing the user with more control during use. Compact design for comfortable handling at only 170mm in length 4 Stage power selection for optimum rpm and fastening torque Maximum nut busting torque of 1,000Nm with 700Nm max. fastening Unique rubber joint suppress vibration to battery terminals Forward & reverse auto stop function, optimised for fastening applications Specifications Max. capacities standard bolt: M10-M24 Max. capacities high tensile bolt: M10-M16 No load speed: Max: 0-2,200rpm Hard: 0-1,900rpm Med: 0-1,200rpm Soft: 0-500rpm Impact rate: Max: 0-2,700ipm Hard: 0-2,400ipm Med: 0-1,700ipm Soft: 0-1,000ipm Max. fastening torque: Max: 700Nm Hard: 320Nm Med: 200Nm Soft: 150Nm Nut busting torque: 1,000Nm Drive shank: 12.7mm (1/2) Square MAKITA 18V 125mm Random Orbital Sander Skin DBO180Z Simple to operate electronic push button switch with 3-speed settings Connectable to dust extractor Compact design with short height and lower centre of gravity for better manoeuvrability 125mm Abrasive Paper Size MAKITA 18V Brushless Stick Vacuum Skin DCL283ZBX1 The NEW 18V Brushless Stick Vacuum (DCL283ZBX1) features a simple to use trigger or lock on slide switch. The Brushless motor delivers a max sealed suction of 17.5kPa to power through tough applications while remaining lightweight at just 1.6kg with battery. The HEPA filter provides a high filtration rate of 99.97% and the translucent capsule has a 730mL capacity for easy disposal of collected dust and debris. Weighs only 1.6kg with battery for high efficiency and ease of use HEPA filter provides high filtration rate of 99.97% High performance 17.5kPa max sealed suction Easy operation with trigger or slide lock on switch 730mL Capsule collection capacity Specifications Max. sealed suction: 17.5kPa Max. air volume: 1.1m³/min Capacity: 730mL Suction power: 90W MAKITA 18V Brushless D-Handle Jigsaw Skin DJV184Z 4 key components make up our LXT Advantage, providing you with the most advanced, dependable 18V tools on the market. Our fast charging batteries, rapid optimum chargers, industry leading brushless motors and our STAR Protection computer controls make each and every one of the world’s largest 18V range of tools the best option for the job, no question. The Makita 18V LXT Brushless D Handle Jig Saw (DJV184) delivers fast and efficient cutting, with a compact design that’s engineered for ease of use and maneuverability. The DJV184 features a top handle design and is ideal for woodworkers, cabinet makers, builders, and general trades. The DJV184 has a compact and ergonomic design with less weight (only2.4kg. with 18V LXT 6.0Ah battery, sold separately). The efficient Makita built brushless motor is engineered for longer run time, increased power and speed, and longer tool life. The variable 5 speed control dial (0 3,000 SPM) enables the user to match the speed to the application, and the 3 orbital settings plus straight cutting provide added versatility. Convenience features include tool less blade changes, large 2 finger variable speed trigger with lock on button and a built in dust blower to clear the line of cut. Constant speed control maintains cutting speed under load Tool-less blade change for quick and convenient blade changes 3 orbital settings plus straight cutting deliver faster and more accurate cuts in a variety of materials Variable control dial enables user to match the speed to the application Soft No Load feature automatically reduces SPM for more accurate cutting starts Specifications Max. cutting capacities in wood: 135mm Max. cutting capacities in steel: 10mm Max. cutting capacities in aluminium: 20mm Length of stroke: 23mm Strokes per minute: 0-3,000spm Bevel capacity: 45 left – 45 right MAKITA 18V Brushless AWS 82mm Planer Skin DKP181Z The DKP181Z delivers heavy duty cutting performance with a high powered Brushless Motor, allowing a massive 3mm max. cutting depth. Coupled with Automatic Torque Drive technology the planer automatically adjusts speed and torque depending on the load conditions for optimal cutting. Also featuring an electric brake and a foot on the base plate, increasing safety and protecting workpieces from any possible damage. The DKP181Z features AWS, enabling wireless connection to a compatible Bluetooth vacuum for on demand dust extraction, providing a cleaner and safer work environment. High powered motor allows maximum 3mm cutting depth Auto start Wireless System (AWS) for on demand dust extraction 12,000rpm no load speed with Automatic Torque Drive performance Left or right side chip ejection Electric brake & foot on base plate protect workpiece from damage Specifications Planing width: 82mm Max. planning depth: 3mm Shiplapping / rebate: 25mm Noise: 84db(A) Vibration: 5.0m/s² AWS receiver sold separatelyMAKITA 18V Blower Skin DUB185Z Increased air volume with 3.2m³/min 3 stage air volume settings & variable speed trigger for maximum control Wind speeds of up to 352km/h for higher blowing efficiency Ultra-lightweight at just 2.1kg Specifications Increased air volume with 3.2m³/min 3 stage air volume settings & variable speed trigger for maximum control Wind speeds of up to 352km/h for higher blowing efficiency Ultra-lightweight at just 2.1kg Specifications Max air volume: 3.2m³/min Max. Air Velocity: 352km/h No Load Speed: 0 – 18,000rpm Overall Length: 517mm Skin weight: 1.5kg Voltage: 18V MAKITA 40V Max XGT Bluetooth Jobsite Radio Skin MR002GZ The MR002G delivers great sound in a compact design, equipped with AM / FM radio and Bluetooth to wirelessly connect your mobile device to play music. It has one auxiliary port for MP3 compatibility, and delivers rich stereo sound from two powerful 89mm side-firing speakers. The MR002G is engineered to stand up against harsh job site conditions with protective bumpers, and features dust and water resistant construction for increased durability. Audio Modes: AM & FM radio frequencies High quality sound with 2 large 89mm speakers Durable design with an IP65 rating protection against dust and water Powered by 40V Max, 18V, 12V Max or AC Power Runtime up to 53 hours Specifications Continuous runtime: 40V Max 4.0Ah: 27.5hours | 18V 6.0Ah: 27.5hours Practical max. output: 40V Max: 5Wx2 | 18V: 3.5Wx2 Frequency band: AM:520-1,710kHz / FM:87.5 –108MHz Bluetooth range: Max. 30m, Optimum 10m Voltage: 40V Max, 18V, 12V Max or AC Power MAKITA 18V Long Distance Torch Skin DML812 The DML812 is designed to provide powerful illumination across large distances, capable of lighting up objects 640 metres away. It is powered by 18V batteries with high brightness neutral white LED’s providing a maximum 1,250lm. The DML812 features 4 output modes, allowing selection between spot light, flood light, spot/flood and strobe, providing varied lighting for varying purposes. Long beam distance lights up objects 640 metres away 4 output modes; spotlight, floodlight, spot/flood and strobe High brightness neutral white LED’s provide a maximum 1,250lm Continuous runtime up to 7hours with a 5.0Ah in spotlight mode Specifications Continuous runtime (6.0Ah): Spot Light: 10hrs Flood Light: 7.5hrs Spot & Flood: 6.0hrs Luminous flux: Spot Light: 600lm Flood Light: 1,000lm Spot & Flood: 1,250lm Illuminance (at 1m): Spot Light: 71,000lx Flood Light: 520lx Spot & Flood: 51,000lx MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850B-L Integrated L.E.D. battery charge level indicator allows user to monitor battery charge Up to 33% more run time per charge compared to BL1830 Fast 40 minute charging time Battery delivers consistent power and run time in extreme temperatures, even in winter (-20C) Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications Battery resists self-discharge and remains ready for use even after long periods of storage Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture Star protection computer controls – includes overload protection, over-discharge protection and over heat protection The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating MAKITA 18V Lithium-ion Dual-Port Rapid Battery Charger DC18RD 1969360 Fast charging – charges 2 x 3.0Ah Lithium-Ion batteries at the same time in only 22 minutes Built-in CPU – gathers information from the battery’s memory chip to determine optimum charging method Forced air cooling fan – cools the battery to minimise charging time LED charging display Full charge sound alert USB port provides 1.5A output for charging smart phones, tablets, etc MAKITA Canvas Tool Bag Suits LXT418 & LXT423 1999369 Ideal for transport & storage of your favourite Makita tools Weather Resistant Durable Nylon Cordura Construction Internal Pockets feature straps to retain tools during transit External pockets enable storage of accessories and more