Makita Cordless Tools | SHOP BY CATEGORY 18V Brushless 4 Piece 2 X 5.0Ah Combo Kit Dlx4186Tx1

Product Description

Includes 1 x MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z 1 x MAKITA 18V Brushless 4-Stage Impact Driver Skin DTD173Z 1 x MAKITA 18V Brushless 125mm Angle Grinder Skin DGA508Z 1 x MAKITA 18V Brushless 1/2inch Mid-Torque Impact Wrench Skin DTW700Z 2 x MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850B-L 1 x MAKITA 18V Lithium-Ion Battery Charger DC18RC 1955892 1 x MAKITA Nylon Tool Bag 1999351 MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z The 18V Brushless Hammer Driver Drill provides 141Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications. Compact Design – for improved handling and control the overall length has been reduced by 27mm vs. the previous model 3 Drilling Modes – screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 141Nm max. torque. Hammer Drilling mode (rotation with hammering) on the for drilling in masonry up to a maximum 16mm hole diameter. LED Joblight – high brightness twin LED joblight with pre-glow and after glow functions. Illuminating the working area for greater visibility during application High Power Output – This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. 2 Speed Mechanical Gearing – high speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation. All metal gear construction – allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability, and will continue to perform in years to come. XPT – Extreme Protection Technology protects the tool against dust & moisture even in the harshest jobsite conditions, increasing durability Specifications Max. drilling capacities in wood: Auger bit: 50mm Self-feeding bit: 76mm Hole saw: 152mm Max. drilling capacities in steel: 13mm Max. drilling capacities in masonry: 16mm No load speed: Hi: 0 – 2,100rpm Lo: 0 – 550rpm Impact rate: Hi: 0 – 31,500ipm Lo: 0 – 8,250ipm Max. peak torque: 141Nm Max. tightening torque: Hard: 130Nm Soft: 65Nm MAKITA 18V Brushless 4-Stage Impact Driver Skin DTD173Z Experience precision, power, and control like never before with the Makita DTD173 Impact Driver. Featuring an innovative battery layout, this tool stands out by repositioning the center of gravity directly in line with the grip. The result Enhanced balance and stability for superior control in every application. With a maximum fastening torque of 180Nm, the DTD173 tackles heavy-duty tasks effortlessly, while its 4- stage speed selection and Assist mode variations provide optimal control for every job. At only 111mm in length, its compact design excels in tight spaces, and the quick switch button allows seamless one-handed mode adjustments for uninterrupted workflow. For added durability and precision, the enhanced bit holder minimizes wobble, ensuring accuracy when it matters most. Whether you’re a professional tradesperson or a DIY enthusiast, the Makita DTD173 is engineered to deliver performance and reliability every time. Makita: Built for those who demand the best. Optimised battery layout, moves center of gravity in line with the grip for enhanced control Maximum fastening torque of 180Nm for heavy duty applications 4 stage speed selection & 4 Assist mode variations for optimised speed control Compact design at only 111mm in length for comfortable use in tight spaces Quick switch button for single handed mode selection Enhanced bit holder provides reduced bit wobble Specifications No load speed Max.: 0 – 3,600rpm Hard: 0 – 3,200rpm Med: 0 – 2,100rpm Soft: 0 – 1,100rpm Impact rate Max.: 0 – 3,800ipm Hard: 0 – 3,600ipm Med: 0 – 2,600ipm Soft: 0 – 1,100ipm Max. tightening torque Max.: 180Nm Hard: 170Nm Med: 50Nm Soft: 20Nm Drive shank 6.35mm(1/4″) Hex Overall length 111mm Skin weight 0.8kg Weight (with battery) 1.5kg (BL1860B) Voltage 18V Includes Belt clip (346317-0) 266622-8 (Truss Head Screw) MAKITA 18V Brushless 125mm Angle Grinder Skin DGA508Z BL Brushless Motor, provides more power and longer run times Electric brake, for increased safety and effeciency Kickback detection, detects sudden changes in wheel speed and shuts down motor Automatic Torque Drive, automatically slows rpm increasing torque to power through cuts Anti restart function Paddle switch design No Load Speed: 8,500rpm Overall Length: 362mm Wheel Size: 125mm MAKITA 18V Brushless 1/2inch Mid-Torque Impact Wrench Skin DTW700Z The 18V Brushless 1/2 Impact Wrench is designed to suit the needs of manufacturing technicians, mechanics and fabricators. The DTW700 has an efficient Makita Brushless Motor, providing powerful torque in a compact design with 700Nm of maximum fastening torque and a powerful 1,000Nm of nut busting torque. The DTW700 features 4-stage power selection, increasing versatility and allowing the user to select the optimum rpm and fastening torque for the task at hand. It also features a forward and reverse automatic stop function, with 6 modes optimised for fastening applications, providing the user with more control during use. Compact design for comfortable handling at only 170mm in length 4 Stage power selection for optimum rpm and fastening torque Maximum nut busting torque of 1,000Nm with 700Nm max. fastening Unique rubber joint suppress vibration to battery terminals Forward & reverse auto stop function, optimised for fastening applications Specifications Max. capacities standard bolt: M10-M24 Max. capacities high tensile bolt: M10-M16 No load speed: Max: 0-2,200rpm Hard: 0-1,900rpm Med: 0-1,200rpm Soft: 0-500rpm Impact rate: Max: 0-2,700ipm Hard: 0-2,400ipm Med: 0-1,700ipm Soft: 0-1,000ipm Max. fastening torque: Max: 700Nm Hard: 320Nm Med: 200Nm Soft: 150Nm Nut busting torque: 1,000Nm Drive shank: 12.7mm (1/2) Square MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850B-L Integrated L.E.D. battery charge level indicator allows user to monitor battery charge Up to 33% more run time per charge compared to BL1830 Fast 40 minute charging time Battery delivers consistent power and run time in extreme temperatures, even in winter (-20C) Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications Battery resists self-discharge and remains ready for use even after long periods of storage Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture Star protection computer controls – includes overload protection, over-discharge protection and over heat protection The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating MAKITA 18V Lithium-Ion Battery Charger DC18RC 1955892 Fast charging – charges Li-Ion 3.0Ah battery in only22 minutes and Li-Ion Compact series batteries in only 15 mins Built-in CPU – gathers information from the battery’s memory chip to determine optimum charging method Forced air cooling fan – cools the battery to minimise charging time Digital power display identifies the condition of the battery and charging condition MAKITA Nylon Tool Bag 1999351 Designed with a gate mouth opening and zip to provide maximum access to the interior Spacious main compartment also contains 4 large pockets to hold tools and accessories 6 external pockets for additional hand tools Made from tough sturdy polyester Padded handles for extra comfort Strong industrial stitching for durability and strength