Makita Power Saws | SHOP BY CATEGORY 18V Brushless 8 Piece 2 X 6.0Ah Combo Kit Dlx8046Gx1

Product Description

Includes 1 x Makita 18V Brushless Hammer Drill Driver Skin DHP486Z 1 x MAKITA 18V 1/4inch Brushless Impact Driver Skin DTD154Z 1 x MAKITA 18V Brushless 125mm Slide Switch Angle Grinder Skin DGA504Z 1 x MAKITA 18V Brushless 165mm Circular Saw Skin DHS680Z 1 x MAKITA 18V Brushless SDS+ Rotary Hammer Skin DHR242Z 1 x MAKITA 18V Brushless Reciprocating Saw Skin DJR187Z 1 x MAKITA 18V Bluetooth Jobsite Radio DMR108N 1 x MAKITA 14.4/18V LED Torch Skin DML802 2 x MAKITA 18V 6.0Ah Battery BL1860B 1 x MAKITA 18V Lithium-ion Dual-Port Rapid Battery Charger DC18RD 1969360 1 x MAKITA LXT Tool Carry Bag Makita 18V Brushless Hammer Drill Driver Skin DHP486Z The 18V Brushless Hammer Driver-Drill provides 141Nm of maximum fastening torque and a no-load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length, this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications. Compact Design – for improved handling and control the overall length has been reduced by 27mm vs. the previous model 3 Drilling Modes – screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 141Nm max. torque. Hammer Drilling mode (rotation with hammering) on for drilling in masonry up to a maximum 16mm hole diameter. LED Job light – high brightness twin LED job light with pre-glow and afterglow functions. Illuminating the working area for greater visibility during application High Power Output – This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. 2 Speed Mechanical Gearing – high-speed mode produces 2,100rpm for rapid drilling speed while low-speed produces high levels of torque to suit high load operation. All-metal gear construction – allow for smooth transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability and will continue to perform in years to come. XPT – Extreme Protection Technology protects the tool against dust & moisture even in the harshest jobsite conditions, increasing durability Specifications Max. drilling capacities in wood: Auger bit: 50mm Self-feeding bit: 76mm Hole saw: 152mm Max. drilling capacities in steel: 13mm Max. drilling capacities in masonry: 16mm No load speed: Hi: 0 – 2,100rpm Lo: 0 – 550rpm Impact rate: Hi: 0 – 31,500ipm Lo: 0 – 8,250ipm Max. peak torque: 141Nm Max. tightening torque: Hard: 130Nm MAKITA 18V 1/4inch Brushless Impact Driver Skin DTD154Z The Makita DTD154Z Brushless Impact Driver has a high rotational speed of 3,600rpm, which is optimum for fast tightening of self-drilling screws. Featuring an aluminium hammer case, variable speed control, and one-touch bit installation, this is a powerful and compact drill to suit any line of work. It also features an electronic 3-stage impact power selection and the new T-Mode especially for tightening self-drilling screws. Aluminium hammer case One-touch bit installation, no need to pull bit sleeve for bit installation Twin LED job light with pre-glow and afterglow functions The high rotation speed at 3600rpm Variable speed controlled by the trigger Ergonomically designed handle with soft grip provides comfortable grip and more control while minimising hand fatigue and pain Electronic 3-stage impact power selection – in order to reduce fault tightening, hard/medium/soft impact power can be selected to the material of workpiece or screw-type simply by pushing a button T-Mode is a special mode optimum for fast tightening of self-drilling screws without damaging the screw and workpiece Specifications Voltage: 18V Capacity: Machine screw: M4 – M8 Standard bolt: M5 – M16 High strength bolt: M5 – M14 Coarse thread (length): 22mm – 125mm Impacts per minute: Speed 1: 0 – 3800ipm Speed 2: 0 – 2600ipm Speed 3: 0 – 1100ipm No load speed: Speed 1: 0 – 3600rpm Speed 2: 0 – 2100rpm Speed 3: 0 – 1100rpm Max fastening torque: 175Nm Vibration level: 12.5m/s² Sound pressure level: 96dB(A) Sound power level: 107dB(A) Dimensions (L x W x H): 117mm x 79mm x 236mm Weight: 1.2kg MAKITA 18V Brushless 125mm Slide Switch Angle Grinder Skin DGA504Z Kickback detection, anti-restart, and soft start Automatic Torque Drive increases torque to power through any cut Extreme performance with 8,500rpm no load speed XPT technology that protects against dust & moisture Electronic current limiter Easy to hold grip design with rubber for anti-skid World’s deepest concrete cutting mobile angle grinder at a depth of 20mm Excellent performance – as powerful as AC model Gear housing can be rotated to suit most cutting and grinding applications Automatic speed control changes the cutting speed according to load condition for an optimum operation Anti-restart function prevents accidental startup for safety even if the machine is plugged into a power source with the lock-on switch on MAKITA 18V Brushless 165mm Circular Saw Skin DHS680Z Powerful Brushless DC motor (BLDC) Automatic Torque Drive; automatically increases motor torque according to load conditions Magnesium base with 45 and 50 degrees bevel cutting capacity Compact and lightweight design Rear dust exhaust port Twin LED job light with pre-glow LED indicator panel with 3 indicators for Battery Fuel Gauge, Automatic Torque Drive and Overload Protection Tool hanger for hanging on a ladder or rafter Large lock-off lever easily operated even with a gloved hand Compatible with 1.5, 3.0, 4.0, and 5.0Ah Lithium-Ion batteries Specifications Voltage: 18V No Load Speed: 5,000rpm Bevel Capacity: 50 Blade Diameter: 165mm Max Cutting Capacities: 0: 57mm 45: 41mm 50: 37mm Weight: 3.3kg Length: 350mm MAKITA 18V Brushless SDS+ Rotary Hammer Skin DHR242Z 3 Mode operation: hammer only, rotation only, rotation & hammer Unique rubber joint suppresses vibration to battery 2.0j of impact energy MAKITA 18V Brushless Reciprocating Saw Skin DJR187Z 32mm stroke with a cutting capacity of 255mm in wood Newly designed vertical crank mechanism reduces vibration High performance 3,000spm no-load speed Rafter hanging hook for added convenience XPT technology that protects against dust & moisture Specifications Length of Stroke: 32mm Max. cutting capacities in pipe: ø 130mm Max. cutting capacities in wood: 255mm Overall Length: 439mm Strokes per minute Hi: 0 – 3,000spm Lo: 0 – 2,300spm Voltage 18V MAKITA 18V Bluetooth Jobsite Radio DMR108N Bluetooth for streaming audio and AM/FM Radio Powered by either, 18V LXT, 12V Max CXT, 10.8V, or AC power High-quality sound produced by 2 x large 89mm speakers Continuous runtime up to 36 hours with an 18V 6.0Ah Compact design with IP64 rating ideal for Jobsite conditions MAKITA 14.4/18V LED Torch Skin DML802 Ergonomic design Up to 13hrs on a 3.0Ah battery Single 3.2W LED produces 160lm brightness Specifications Continuous Runtime: 3.0Ah – 13hrs Illuminance: 4,000 lx Luminous flux: 160 lm Overall Length: 273 mm Skin weight: 0.33 kg Voltage: 18V MAKITA 18V 6.0Ah Battery BL1860B Fuel gauge indicator, displays charge remaining on battery in four stages Built in memory chip communicates the usage history with the charger Built in shock absorbers protect the cells from jobsite conditions High energy cells pack more power per cell to reduce number of cells and overall weight Large release button for easy removal from the tool Built in air vents and wall cools the battery cells evenly whilst blocking damaging debris 16 contact terminals provide consistent power and firm hold in any environment MAKITA 18V Lithium-ion Dual-Port Rapid Battery Charger DC18RD 1969360 Fast charging – charges 2 x 3.0Ah Lithium-Ion batteries at the same time in only 22 minutes Built-in CPU – gathers information from the battery’s memory chip to determine optimum charging method Forced air cooling fan – cools the battery to minimise charging time LED charging display Full charge sound alert USB port provides 1.5A output for charging smart phones, tablets, etc MAKITA LXT Tool Carry Bag 199936-9 Wide deep main pocket provides quick tool location & easy access Adjustable heavy-duty shoulder belt makes lifting more comfortable Metal hooks at the ends to unfasten the belt when not needed Handles made of polypropylene tape & foam – Extra comfort