Rotabroach Corded Tools | SHOP BY CATEGORY 1200W Magnetic Drill With 5 Piece Cutter Kit Element403C

Product Description

The Element 40 machine is fitted with Rotabroach’s unique CutSmart panel designed to increase your tool life and productivity. The CutSmart feature is an ingenious LED traffic light system that detects cutting depth to offer optimum cutting and machine performance. These lights are: Green Zone – Perfect, try to keep in the green zone for the best cut and optimum machine performance.Yellow Zone – A little too much pressure on the drill, ease off to get back to the green zone.Red Zone – Overload: Back off immediately, as too much force will cause the motor to cut off if you continue. This magnetic drill is a combination of power and portability. This machine is one of the lightest magnetic based drills in the world and is suitable for drilling up to 40mm diameter by 50mm depth. For more information follow the link https://www.totaltools.com.au/blog/post/introducing-rotabroach-cutting-solutions/ Cutsmart Technology Fixed Guard Magnetic Detection Electronic overload protection light High powered magnet Ergonomic carry handle Quick release capstan arm Suitable for drilling up to 40mm diameter by 50mm depth Specifications: Voltage: 230V 50Hz Power: 1200W No load RPM: 600/min Core bore diameter: φ40mm Max. Twist drill bore diameter: φ13mm Max. Cutting depth: 50mm Magnet Size: 180mm x 90mm Magnet strength: 10,000N Holding Force at 20C with 25mm min plate thickness. The use on any material less than 25mm thick will progressively reduce the magnetic performance. If possible, substitute material should be positioned under the magnet and work piece to equate to a suitable material thickness. If this is not possible, an alternative secure method of restraining the machine MUST be used.Includes: 1200W Magnetic Drill 5pc Cutter Kit (Annular Cutters: 14, 16, 18, 20, 22mm; 2x Pilot bits; Storage case) Safety strap Safety Glasses