Carbatec Corded Tools | SHOP BY CATEGORY 330Mm Spiral Head Benchtop Thicknesser Th-Bx330P

Product Description

This machine is an excellent addition to your workshop and does not take up the space that a full-size machine does. Dual size dust ports of 100mm or 63mm mean either a dust extractor or Shop Vac type vacuum can be used with this machine. If you are opting for the dust collector we recommend a 2HP machine be paired with this thicknesser. The tool compartment has a spot for all the tools required for this machine, so they will never become lost. Twenty six (26) High Speed Steel blades are fitted to the head as standard and will cope with softer timbers. Should you be working harder, more dense timbers then upgrade to the tungsten blades that are available as an optional extra. When making comparisons between the blades keep in mind that tungsten will hold the edge longer than HSS yet HSS is sharper first up. It really is a choice by the user to get the right blades for the job. The blades are easily fitted and change meaning there is no need for fiddly setups or jigs. There are three ways of determining the depth of cut on this machine. Firstly, and the most obvious is the scale indicating the height of the head in relation to the table underneath, this is adjustable. Second is the pressure gauge, when the head is lowered onto the workpiece, the pressure sensor lifts the needle indicating how much timber would be removed if planned at a particular setting. And the third is the pre-set heights giving this machine an edge over the competition! On the end of the machine there are presets that take you directly to the desired thickness. These are set at 1/8″, 1/4″, 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″ and 1-3/4″ (3.18mm, 6.35mm, 12.7mm, 19.05mm, 25.4mm, 31.75mm, 38.1mm and 44.45mm). All of these combined make getting your piece of timber planned to the thickness you want, easily, without guessing or using external tools like calipers or a tape. Advised cut depth up to 1 mm for up to 151 mm wide and 0.5 mm up to 330 mm wide. If hardwoods are intended to be used with this machine, Tungsten blades are recommended.  The use of dust extraction is required for this machine to remove the build-up of saw dust around the cutter head. The use of a 2HP dust collector is the most effective method. 26 HSS spiral blades, each blade has two cutting edges Minimum stock thickness of 3.2mm Maximum stock thickness of 150mm Dust port 100mm or 63mm using the reducer included Pressure depth gauge Pre-set depth settings Maximum cutting width 330mm Polyurethane rollers will not damage workpieces Lightweight – compact design means it can be moved easily Specifications Motor: 1800W (2.4HP) Brushed, 10A plug Cutterhead: Segmented Spiral – two-edgeblades Dust Port: 100mm or 63mm (4″ or 2.5″) Infeed/Outfeed Roller: Polyurethane Maximum Cutting Width: 330mm Maximum Depth Of Cut: Max 3.0mm (narrow cut) – 1.5mm recommended Minimum Stock Thickness: 3.2mm Maximum Stock Thickness: 150mm Stand Included Or Integral: Benchtop (optional stand available) Table Material: Pressed Metal Table Size: 330mm x 860mm Workshop Footprint (WxDxH): 860mmW x 670mmD x 500mmH Feed Rate: 8m/min